Industrial Power over Ethernet PoE Injectors
“The Sixnet Industrial Power over Ethernet PoE Injectors EB-PSE-24V-1 or EB-PSE-48V-2 industrial PoE power injectors”
SlimLine Plus PoE Industrial Connectivity
Industrial Connectivity Product Highlights
- Fully IEEE 802.3af compliant Power Sourcing Equipment
- Model 1 directly runs off of your existing 24 VDC and powers 1 PoE (48 VDC) port
- Model 2 saves you space and money by powering 2 PoE (48 VDC) ports
- Plug and play saves you time and money
- Industrial rated for any application
Industrial Power over Ethernet PoE Injectors Description
The Red Lion’s Sixnet Industrial Power over Ethernet PoE Injectors EB-PSE-24V-1 or EB-PSE-48V-2 industrial PoE power injectors add 48 VDC power into 1 or 2 Ethernet ports so that you can pass power and data over the same wire to your Ethernet devices in the field. Using unused pairs or signel pairs depending on version ordered.
- The 24V-1 model steps up your 24 VDC to 48 VDC for sourcing 1 PoE port so no separate DC/DC converter is required.
- The 48V-2 model provides two injectors in one to save space and money. The model requires 48 VDC Input.
Both models are ultra-rugged.
Industrial Connectivity Product Highlights
-
Fully IEEE 802.3af compliant Power Sourcing Equipment (PSE) operation
-
Model 1 directly runs off of your existing 24 VDC and powers 1 PoE (48 VDC) port
-
Model 2 saves you space and money by powering 2 PoE (48 VDC) ports
- Plug and play saves you time and money
- Industrial rated for any application
Plug & Play Simplicity
- No user settings
- Ready to use right out of the box
Industrial Tough
- Truly industrial -40 to 75°C operation (derated)
- Slim package for DIN-rail or panel mounting
Features
- Power Sourcing Equipment (PSE) operation
- Auto-detection of PD (powered devices)
- Supplies up to 15.4 watts per channel
- Over-temperature and over-current detection
- Over and under-voltage protection
Specification
Ethernet Performance
- Ethernet protocols supported all IEEE 802.3
- Ethernet connectors per channel 2 (1 for Ethernet in, 1 for PoE out)
- Ethernet port standards 10/100BaseTX IEEE 802.3/802.3u
PoE Output
- Fully IEEE 802.3af compliant
- IEEE 802.3af PoE operation Power Sourcing Equipment (PSE)
- PoE power output 48 VDC @ 15.4 Watts per channel
- 24V model: Derate 1W per 2°C over 60°C
-
RJ45 PoE pin assignments (A=unused pair; B=signal pair)
- A: TX(3,6); RX(1,2); V-(7,8); V+(4,5)
- B: TX/V- (3, 6); RX/V+ (1, 2)
- PoE operation auto-detection and power management
- PoE disconnect mode AC for 24V-1 and DC for 48V-2
- PoE protection over-temp, over-current, over/under-voltage and transient
- Power input fully IEEE 802.3af PoE compliant
- Power input for 48V-2 models 45-56 VDC @ 31 Watts max.
- Power input for 24V-1 models 18-30 VDC @ 20 Watts max.
- PoE transient protection 15,000 watts peak
- PoE spike protection 5,000 watts (10 times for 10 uS)
Environmental
- Operating temperature range -40 to 75°C (cold startup @ -40)
- 24V model: Derate 1W per 2°C over 60°C
- Storage temperature range -40 to 85°C
- Humidity (non-condensing) 5 to 95% RH
- Vibration, shock and freefall IEC68-2-6, -27 and -32
- Electrical safety UL508/CSA C22.2/14 (CUL); EN61010-1
- EMC emissions and immunity FCC Part 15 / ICES-003; EN55022/IEC61326-1
- Hazardous locations UL1604/CSA C22.2/213 (CUL), C1, D2; ATEX/Cenelec Zone 2
Mechanical
- DIN-rail or direct to panel mounting
- Packaging material and protection Lexan with IP30 protection
- Dimensions (H x W x D) 4 x 1 x 3.3” (10 x 2.5 x 8.3 cm)
- Weight approximate 0.17 Kg (0.25 lbs)
- MTBF estimated >1,000,000 hours
Specifications are subject to change.
Order Guide
Part Number | Description |
---|---|
EB-PSE-24V-1A | PoE injector for 1 PoE port (uses unused pairs), 24V input |
EB-PSE-48V-2A | PoE injector for 2 PoE port (uses unused pairs), 48V input |
EB-PSE-24V-1B | uses signal pairs for PoE, ideal for 4 wire cables (special order) |
EB-PSE-48V-2B | uses signal pairs for PoE, ideal for 4 wire cables (special order) |
[ssba multisite=1]For more information
Contact Network specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect product that meets your needs.
Contact us via our Network Enquiry Form