+44 (0)1638 660 629

SLX-10MG Industrial Ethernet Switch

industrial_gigabit_managed_switch_10portSlimLine Plus Gigabit Industrial Connectivity

The SLX-10MG is a 10 port industrial Ethernet switch with managed capabilities, 7 fast and 3 Gigabit ports of which two are combination ports that support both copper and fiber optic connections. This switch is designed to be rugged, reliable, real-time and secure. It combines compact DIN-rail packaging, protected circuitry and powerful software to keep your system going even under the toughest conditions.

 

Overview

Industrial Switch Product Highlights

  • 10 ports including
    • 7 fast Ethernet 10/100 RJ45 ports
    • 1 Gigabit Ethernet 10/100/1000 RJ45 port
    • 2 Gigabit combo ports for copper or fiber
  • High port count in a small footprint
  • Truly rugged design with -40 to 75°C operation
  • Easy to configure management functions

Features

Two Flexible Combination Gigabit Ports

Your choice, either connect to the RJ45 for a 10 /100 /1000 Mbps auto-detecting copper link or plug in a fiber transceiver for a 100 or 1000Mbps noise-immune fiber link. These advanced ports give you the flexibility you need and make your job easier!


Real-Time Secure Performance

  • Real-Time Ring™ or Rapid Spanning Tree (RSTP) for fast redundant ring or mesh networks
  • SNMPv1 and v2 network management
  • SNMPv3 authentication and encryption for security
  • SNMP notifications (traps) for report on event
  • Priority Queuing (QoS/CoS) for real-time operation
  • IGMP for Multicast filtering (snooping and querying)
  • VLAN for convenient traffic segregation
  • Broadcast and multicast storm protection
  • RMON and port mirroring for advanced diagnostics
  • Security with HTTPS, SSL, SSH, SNMPv3 and more
  • Easy configuration via Web, Telnet or CLI
  • Free field-installable firmware upgrades forever


Trouble-Free Operation

  • -40 to 75 °C operating range
  • UL/CSA (CUL), CE and Hazloc (Zone 2) rated
  • Dual (redundant) power inputs
  • Industrial surge and spike protection
  • Self-test/alarm output contact
  • DIN-rail or direct-panel mounting

Specs

Ethernet Performance

  • 10 Ethernet ports including 3 Gigabit
  • Managed, store and forward, wire-speed
  • All IEEE 802.3 Ethernet protocols supported
  • RJ45 ports 1 – 7 (shielded) 10/100BaseTX
  • RJ45 ports 8 – 10 (shielded) 10/100/1000BaseTX
  • RJ45 port speed auto-negotiation
  • RJ45 MDI/MDIX auto-crossover
  • RJ45 TD and RD auto-polarity
  • Ports 9 and 10 are combination gigabit ports that have both a RJ45 connector and SFP fiber connector. For each of these ports, only one of the connectors can be used at a time.
  • SFP (pluggable) ports 9 – 10 accept mini-GBIC transceivers
  • Fiber optic port speed: 100 Mbps or 1000 Mbps
  • Fiber typical specs (see separate datasheet for details)
    • Multimode, 0.55 km, 850 nm, 50-62.5/125 µm
    • Singlemode, 10 km, 1310 nm, 9-10/125 µm
    • Long haul, up to 120+ km, 1550 nm, 9-10/125 µm
  • Typical latency (varies on load and settings)
    • @ 10 Mbps: 16 us + frame time
    • @ 100 Mbps: 5 us + frame time
  • Full or half duplex operation configurable per port
  • MAC addresses supported 8192
  • Memory bandwidth 32 Gbps
  • Ethernet isolation 1500 VRMS 1 minute
  • Console ports – USB and RS232 (RJ45)


Ethernet Compliance

  • IEEE 802.3z (Gigabit 1000 Mbps Ethernet connections)
  • IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
  • IEEE 802.3 (10Mbps Ethernet supports legacy devices)
  • IEEE 802.3x (Full-Duplex with Flow Control)
  • IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and Spanning Tree for interoperability)
  • IEEE 802.1p (Priority Queuing – QoS, CoS, ToS / DS)
  • IEEE 802.1Q (VLAN for traffic segregation)


Real-Time Ring™

  • Link loss recovery: 30 mS plus 5 mS per hop
  • Switches in a ring: <50 for best performance
  • Multiple rings supported (configurable)


“OK” Alarm Output

  • Indicates power and operational status
  • Voltage same as switch input voltage
  • Maximum current output 0.5 Amp


Power Input

  • Redundant input terminals
  • Reverse polarity protection
  • Input power (typical with all ports active)
    • 5 W (w/ no fiber plugged in)
    • 7 W (w/ 2 fiber plugged in)
  • Power input voltage 10-30 VDC
  • Transient protection 15,000 watts peak
  • Spike protection 5,000 watts (10x for 10 uS)


Environmental

  • Operating temperature:
    • -40 to 75 °C (cold startup at -40 °C)
  • Storage temperature -40 to 85 °C
  • Humidity (non-condensing) 5 to 95% RH (optional conformal coating is available)
  • Vibration and shock – IEC60068-2-6, and -27


Standards & Compliance

  • Electrical safety – UL508/CSA C22.2/14; EN61010-1, CE
  • EMC – FCC part 15, ICES-003; EN61000-6-2/4, CE
  • Hazardous locations – UL1604/CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2, Category 3), CE (ATEX)
  • Maritime – designed for marine and offshore per ABS
  • NEMA TS-2 for traffic control systems
  • NEMA TS-2 applies to SLX-10MG-1
  • RoHS and WEEE compliant
  • ISO9001:2008 certified company


Physical

  • DIN-rail or direct-panel mounting
  • Case – Corrosion-resistant aluminum
  • Ingress protection – IP40
  • Weight – 0.34 kg (12 oz.)
  • Dimensions – see mechanical diagram

 

All specifications are subject to change. Contact Sixnet to learn more.

Order Guide

Part NumberDescription
SLX-10MG-110 port industrial Ethernet switch
GMFIBER-SFP-500Gigabit SFP fiber transceiver, mm, 550 m
GMFIBER-SFP-2KGigabit SFP fiber transceiver, mm, 2 km
GSFIBER-SFP-10KGigabit SFP fiber transceiver, sm, 10 km
GSFIBER-SFP-30KGigabit SFP fiber transceiver, sm, 30 km
GSFIBER-SFP-50KGigabit SFP fiber transceiver, sm, 50 km
GSFIBER-SFP-80KGigabit SFP fiber transceiver, sm, 80 km
FMFIBER-SFP-4K100Mb SFP fiber transceiver, mm, 4 km
FSFIBER-SFP-30K100Mb SFP fiber transceiver, sm, 30 km
FSFIBER-SFP-60K100Mb SFP fiber transceiver, sm, 60 km
FSFIBER-SFP-100100Mb SFP fiber transceiver, sm, 100 km

Contact Sixnet for special or long haul transceivers up to 120 Km.

Part NumberDescription
ET-PS-024-02Power supply – AC to 24VDC, 2A
SP-ETH-2Dual port Ethernet surge and lightning protector for the 10/100 ports only
RJ45-DB9F-CBLConsole port cable, DB9 to RJ45

Software

Industrial Ethernet Switch Software & Firmware Downloads

  • New Firmware Releases
  • Legacy Firmware
  • Revision History
  • Firmware Loader
  • USB Driver
  • SNMP MIB File

Product Range

Part NumberTypeTotal Ports10/100100 Fiber10/100Gig FiberIngress Protect
SLX-3EG-1SFP.Unmanaged3--21IP40
SLX-3ES-2/3.Unmanaged321---IP40
SLX-5ES-1Unmanaged55---IP40
SLX-5ES-2/3Unmanaged541--IP40
SLX-5EG-1Unmanaged5--5(4PoE0-IP40
SLX-5EG-2SFPUnmanaged5-up to 23PoEup to 2IP40
EB-5ES-PSE-1. Unmanaged55(4 PoE)up to 1--IP40
SLX-6ES-4/5Unmanaged642--IP40
SLX-8ES-1Unmanaged88---IP40
SLX-8ES-6/7Unmanaged853--IP40
SLX-9ES-2/3Unmanaged981--IP40
SLX-6RS-1. Ring66---IP40
SLX-6RS-4/5Ring642--IP40
SLX-5MS-1Managed55---IP40
SLX-5MS-4/5Managed532--IP40
SLX-5MS-MDM-1Managed55---IP40
SLX-8MS-1Managed88---IP40
SLX-8MS-4/5/8/9Managed84 or 62 or 4--IP40
SLX-8MG-1. Managed8-up to 48up to 4IP40
SLX-10MG-1. Managed107up to 23up to 2IP40
SLX-16MS-1. Managed1616---IP40
SLX-18MG-1Managed1816up to 22up to 2IP40

For more information

    Contact Network specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect product that meets your needs.

Contact us via our Network Enquiry Form

 

Please Share Our Content
Share on LinkedIn
Linkedin
Tweet about this on Twitter
Twitter
Share on Facebook
Facebook
Print this page
Print
Email this to someone
email