3 Port Industrial Ethernet Media Converter
SlimLine Plus Unmanaged Industrial Connectivity
The SLX-3ES is an industrial Ethernet copper to fiber media converter that provides fast performance allowing for real-time operation in industrial networking applications. These ruggedized converters are industrial hardened to provide superior reliability. They require no user setup and immediately start operating as soon as they’re powered up.
Industrial Switch Product Highlights
- 2 fast Ethernet (10/100) ports
- 1 fiber optic (10/100BaseFX) port for distances up to 120km
- Slim DIN-rail packaging
- High performance and reliability
- Industrial-hardened design
Applications
- Video & Security
- Transportation
- Oil & Gas
- Mining
- Maritime
Note: These media converters are also available in a SL model which is a lower cost alternative that offer slightly reduced industrial ratings.
SLX/SL Differences
Feature | SLX | SL |
---|---|---|
Operating Temperature | -40 to 85C | -40 to 60C (typical) |
packaging | Heavy-gauge metal | Tough lexan plastic |
Ingress protection | IP40 | IP30 |
Compliance | Same plus NEMA TS-2 | Same lass NEMA TS-2 |
Refer to SL-2ES model information for more details.
Real-Time Ethernet Performance
- Provides plug-and-play simplicity
- Offers ease of use
- Fast wire-speed switching
- Intelligent message routing
- Auto-sensing for speed and duplex
- Auto-MDI/MDIX-crossover works with straight or crossed cables
- Auto-polarity corrects for crossed signals
- No user configuration required
- Dual redundant power inputs
Rugged, Reliable Operation
- Supports deployment in extreme environments
- Provides high reliability in the toughest applications
- Ultra-reliable 1,000,000+ hours MTBF
- -40 to +85°C operating temperature
- Rugged corrosion-resistant metal enclosure
- Hazardous locations for Class I, Div 2 and Zone 2
Ethernet Performance
- Type: unmanaged
- Operation: store and forward wire-speed switching, non-blocking
- Modes: full or half duplex operation with flow control on all ports
- MAC addresses: 1024
- Memory bandwidth: 3.2 Gbps
- Latency (typical):
- 5 µS for 100 Mbps (plus frame time)
- 16 µS for 10 Mbps (plus frame time)
- Ethernet isolation: 1500 Vrms 1 minute
RJ45 Copper Ports
- 2 RJ45 ports fully IEEE 802.3 compliant
- Speed (10/100) and duplex settings (full or half): auto-detecting or manually configurable
- Auto-MDI/MDIX-crossover automatically supports either straight or crossed cables
- Auto-polarity for automatic correction of crossed TD and RD pairs
Fiber Ports
- 1 100 Mbps fiber optic ports
- Connector style: SC or ST
- Multimode: links up to 4 km typical; use with 50-62.5/125 micron fiber
- Singlemode: links up to 120 km typical; use with 9/125 micron fiber
Power Input
- Dual power inputs for redundant power
- Reverse polarity protection
- Input voltage range: 10 to 30 VDC
- Power consumption (typical with all ports linked and active): 3.0 W
- Transient protection: 15,000 W peak
- Spike protection: 5,000 W (10 times for 10 µS)
Environmental
- Operating temperature: -40 to +85°C
- Cold startup: -40°C
- Storage temperature: -40 to +85°C
- Humidity: 5 to 95% RH (non-condensing; conformal coating optional)
- Shock and vibration: IEC60068-2-6 and -27
Standards & Compliance
- Standards: IEEE 802.3, 802.3u, 802.3x, 802.1D/w, 802.1p and 802.1Q
- Electrical safety: UL508, CSA C22.2/14; EN61010-1, CE
- EMC: FCC part 15, ICES-003; EN610006-2/4, CE
- Hazardous locations: ISA 12.12.01, CSA C22.2/213 (Class I, Div 2); EN60079-15 (Zone 2; Category 3), CE (ATEX)
- Marine/maritime/offshore rated per ABS
- MTBF: >2MM hours GB @ 40°C per MIL-HNDBK-217F2
- RoHs and WEEE compliant
Mechanical
- Material: corrosion-resistant aluminum
- Ingress protection: IP40
- Mounting: DIN-rail or direct-to-panel
- Weight: 6 oz (0.17 kg)
- Dimensions: 3” x 1” x 4.50” (7.62cm x 2.54cm x 11.43cm)
Warranty
- 5 years on manufacturing and design defects
All specifications are subject to change. Contact Sixnet to learn more.
This Sixnet exclusive feature allows you to choose the mounting method that best fits your requirements. This capability is a standard feature so no accessories or optional kits are required.
Vertical snap-on DIN-rail
mounting for quickest installation
and optimal rail width utilization.
Vertical screw-to-panel mounting for better shock and vibration resistance.
Flat screw-to-panel mounting for low profile orientation in shallow boxes plus best shock
and vibration resistance.
Unmanaged Industrial Ethernet Media Converters
SLX-3ES-2SC/SCL – 2 RJ45 ports and 1 multimode fiber port (SC style) |
SLX-3ES-3ST/STL – 2 RJ45 ports and 1 multimode fiber port (ST style) |
SLX-3EG-1SFP – All gigabit, 2 RJ45 and 1SFP fiber port |
Part Number | Description |
---|---|
SLX-3ES-2SC | 2 RJ45 ports and 1 multimode fiber SC, 4 km |
SLX-3ES-2ST | 2 RJ45 ports and 1 multimode fiber ST, 4 km |
SLX-3ES-3SC | 2 RJ45 ports and 1 singlemode fiber SC, 20+ km |
SLX-3ES-3ST | 2 RJ45 ports and 1 singlemode fiber ST, 20+ km |
SLX-3ES-3SCL | 2 RJ45 ports and 1 singlemode fiber SC, 40+ km |
SLX-3ES-3STL | 2 RJ45 ports and 1 singlemode fiber ST, 40+ km |
SLX-3EG-1SFP | All Gigabit, 2 RJ45 ports and 1 SFP fiber port |
SL 2ES models | The SL option is a lower cost alternative that provides slightly reduced ratings. Refer to SL models for more details. |
Part Number | Description |
---|---|
ET-PS-024-02 | Power supply - AC to 24VDC, 2A |
SP-ETH-2 | Dual port Ethernet surge and lightning protector for 10/100 ports only |
For more information
- Contact Network specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect product that meets your needs.
Contact us via our Network Enquiry Form
[ssba multisite=1]