Industrial PoE Switch

PoE Switch EB-5ES-PSE

Sixnet’s Industrial PoE Switch EB-5ES-PSE is a 5 port industrial Ethernet switch that combines the rugged reliability of a real-time switch with four industrial Power over Ethernet (PoE) sourcing ports”

Industrial PoE Switch SlimLine Plus Unmanaged Connectivity

Industrial PoE Switch Product Highlights

  • Slim 5 port DIN-rail packaging
  • 4 PoE sourcing ports with full IEEE compliance
  • Pre-configured for plug-and-play simplicity
  • Industrial-hardened design
Description

Industrial PoE Switch EB-5ES-PSE Description

Sixnet’s PoE EB-5ES-PSE PoE Switch is a 5 port industrial Ethernet switch that combines the rugged reliability of a real-time switch with four industrial Power over Ethernet (PoE) sourcing ports. Providing plug-and-play simplicity, these switches automatically sense and support all IEEE 802.3af compliant devices. In addition, advanced technology allows the switches to connect with non-PoE devices without causing damage. This performance saves time and money while keeping networks up and running even in the toughest conditions.

Features

Features

IEEE 802.3af Compliant PoE Ports

  • Power Sourcing Equipment (PSE) operation
  •  Auto-detection of PD (powered devices)
  • Over-temperature and over-current detection
  • Over and under-voltage detection

Real-Time Network Operation

  • Intelligent message routing (no collisions)
  • Supports all standard IEEE 802.3 protocols

True Plug & Play Simplicity

  • Auto-sensing for speed and duplex
  •  Auto-mdi / mdix-crossover and auto-polarity
  • Automatic PoE power management

Trouble-Free Operation

  • Truly industrial -40 to 75°C operation
  •  Dual power inputs with surge protection
  • DIN-rail or direct panel mounting
Specs

PoE EB=5ES-PSE Specification

Ethernet Performance

  • Operation: unmanaged, store and forward, wire-speed switching, non-blocking
  • Modes: full or half duplex operation with flow control supported on all ports
  • Support: all IEEE 802.3 compliant devices and protocols are supported
  • Ethernet compliance
    • IEEE 802.3af (Power over Ethernet)
    • IEEE 802.3 (10Mbps Ethernet for legacy devices)
    • IEEE 802.3u (100Mbps Ethernet for newer devices)
    • IEEE 802.3x (Full-Duplex with Flow Control)
  • MAC addresses: 1024
  • Memory bandwidth: 3.2 Gbps
  • Latency (typical): 5 us for 100 Mbps and 16 us for 10 Mbps (plus frame time)
  • Ethernet isolation: 1500 Vrms 1 minute

RJ45 Copper Ports

  • RJ45 ports: Up to five RJ45 ports that are fully IEEE 802.3 compliant; four of these are PoE (PSE) and fully 802.3af compliant
  • RJ45 speed and duplex: 10/100 auto-detecting for speed and duplex (full or half)
  • RJ45 MDI / MDIX: Auto-mdi / mdix-crossover automatically supports either straight or crossed cables
  • RJ45 Polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs

Fiber Optic Ports

  • One optional 100 Mbps fiber optic port for distances up to 120km
  • Transceivers: SC or ST style
  • Multimode: Links up to 4 km typical; 1310 nm; use with 50 or 62.5/125 um fiber
    • Transmitter power (dB): -21 min, -17 typ, -14 max
    • Receiver sensitivity (dB): -34 typ, -31 max
  • Singlemode: Links up to 20 km typical; 1310 nm; use with 9 or 10/125 um fiber
    • Transmitter power (dB): -15 min, -11 typ, -8 max
    • Receiver sensitivity (dB): -36 typ, -31 max
  • Singlemode Long Haul: Links up to 40 km typical; 1310 nm; use with 9 or 10/125 um fiber
    • Transmitter power (dB): -5 min, -3 typ, -0 max (special order)
    • Receiver sensitivity (dB): -36 typ, -34 max (special order)
  • Longer distances: Contact Sixnet for distances up to 120 km
  • Eye safety: IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11

Power Input

  • Redundancy: Dual power input terminals with reverse polarity protection
  • Power input: 10-30 VDC with no PoE output; 45-56 VDC for PoE output
  • Switch Power Consumption
    • 2.0 W (5-port without fiber) + PoE
    • 3.0 W (5-port with 1 fiber) + PoE
    • Typical for all ports to be active at 100 Mbps
  • PoE Power consumption: Up to 15.4 W per port
  • Transient protection: 15,000 watts peak
  • Spike protection: 5,000 watts (10 times for 10 uS)

PoE Output

  • PoE compliance: 100% IEEE 802.3af compliant
  • PoE classification: PSE (Power Sourcing Equipment)
  • PoE voltage: 45 to 48 VDC depending on power input
  • PoE power: Up to 15.4 watts per channel
  • PoE RJ45: pin assignments TX/V- (3, 6); RX/V+ (1, 2)
  • PoE operation: automatic detection and power management
  • PoE disconnect mode: DC disconnect
  • PoE protection: over-temperature, over-current, over/under-voltage and transient

Environmental

  • Operating temperature: -40 to 75°C (cold startup @ -40)
  • Storage temperature: -40 to 85°C
  • Humidity: 5 to 95% RH (non-condensing)
  • Vibration: IEC68-2-6
  • Shock: IEC68-2-27
  • Freefall: IEC68-2-32

Standards & Compliance

  • Electrical safety: UL508 / CSA C22.2/14 per CUL; EN61010-1
  • EMC: FCC part 15 / ICES-003; EN55022 / IEC61326-1
  • Hazardous locations: UL1604, CSA C22.2/213 per CUL (Class I, Div. 2, Groups A, B, C, D); ATEX / Cenelec (Zone 2)
  • MTBF Mean Time Between Failure: >1,000,000 hours
  • RoHS and WEEE: RoHS (Pb free) and WEEE compliant
  • ISO9001:2000: Certified “Total Quality” company
  • Industrial Warranty: 5 years with product registration

Mechanical

  • Slim line case, ideal for DIN-rail mounting
  • Material: Corrosion-proof polycarbonate plastic
  • Protection: IP30 protection from dust and debris
  • DIN-rail or direct-panel mounting (no optional kits or accessories required)
  • Dimensions: 1.0″ x 4″ x 3.3″ (2.5 x 10.0 x 8.3 cm)
  • Weight: 4 oz. (0.11 kg)

All specifications are subject to change. Contact Sixnet to learn more.

Order Guide

Order Guide

Part NumberDescription
EB-5ES-PSE-1Industrial switch with 4 PoE and 1 RJ45 uplink
EB-5ES-PSE-2SCIndustrial switch with 1 multimode SC for links up to 4 km
(special order)
EB-5ES-PSE-2STIndustrial switch with 1 multimode ST for links up to 4 km
(special order)
EB-5ES-PSE-3SCIndustrial switch with 1 singlemode SC for links up to 20 km
(special order)
EB-5ES-PSE-3STIndustrial switch with 1 singlemode ST for links up to 20 km
(special order)
EB-5ES-PSE-3SCLIndustrial switch with 1 singlemode long haul SC for link up to 40 km
(special order)
EB-5ES-PSE-3STLIndustrial switch with 1 singlemode long haul ST for links up to 40 km
(special order)
Downloads

Downloads

For more information

    Contact Network specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect product that meets your needs.

Contact us via our Network Enquiry Form

 [ssba multisite=1]