Industrial PoE Injector
“The Sixnet EB-PSE-24V-1 or EB-PSE-48V-2 Industrial PoE injector adds 48 VDC power into 1 or 2 Ethernet ports”
Industrial Connectivity Product Highlights
- Fully IEEE 802.3af compliant Power Sourcing Equipment (PSE) operation
- Model 1 directly runs off of your existing 24 VDC and powers 1 PoE (48 VDC) port
- Model 2 saves you space and money by powering 2 PoE (48 VDC) ports
- Plug and play saves you time and money
- Industrial rated for any application
Description
Industrial PoE Injector Description
The EB-PSE-24V-1 or EB-PSE-48V-2 Industrial PoE injector adds 48 VDC power into 1 or 2 Ethernet ports so that you can pass power and data over the same wire to your Ethernet devices in the field. The 24V-1 model steps up your 24 VDC for sourcing 1 PoE port so no separate DC/DC converter is required. The 48V-2 model is two injectors in one to save space and money. Both are ultra-rugged, reliable and easy to use.
Industrial Connectivity Product Highlights
- Fully IEEE 802.3af compliant Power Sourcing Equipment (PSE) operation
- Model 1 directly runs off of your existing 24 VDC and powers 1 PoE (48 VDC) port
- Model 2 saves you space and money by powering 2 PoE (48 VDC) ports
- Plug and play saves you time and money
- Industrial rated for any application
Plug & Play Simplicity
- No user settings
- Ready to use right out of the box
Industrial Tough
- Truly industrial -40 to 75°C operation (derated)
- Slim package for DIN-rail or panel mounting
Features
Industrial PoE Injector Features
IEEE 802.3af Compliant PoE Ports
- Power Sourcing Equipment (PSE) operation
- Auto-detection of PD (powered devices)
- Supplies up to 15.4 watts per channel
- Over-temperature and over-current detection
- Over and under-voltage protection
Specs
Industrial PoE Injector Specification
Ethernet Performance
- Ethernet protocols supported all IEEE 802.3
- Ethernet connectors per channel 2 (1 for Ethernet in, 1 for PoE out)
- Ethernet port standards 10/100BaseTX IEEE 802.3/802.3u
PoE Output
- Fully IEEE 802.3af compliant
- IEEE 802.3af PoE operation Power Sourcing Equipment (PSE)
- PoE power output 48 VDC @ 15.4 Watts per channel
- 24V model: Derate 1W per 2°C over 60°C
- RJ45 PoE pin assignments (A=unused pair; B=signal pair)
- A: TX(3,6); RX(1,2); V-(7,8); V+(4,5)
- B: TX/V- (3, 6); RX/V+ (1, 2)
- PoE operation auto-detection and power management
- PoE disconnect mode AC for 24V-1 and DC for 48V-2
- PoE protection over-temp, over-current, over/under-voltage and transient
- Power input fully IEEE 802.3af PoE compliant
- Power input for 48V-2 models 45-56 VDC @ 31 Watts max.
- Power input for 24V-1 models 18-30 VDC @ 20 Watts max.
- PoE transient protection 15,000 watts peak
- PoE spike protection 5,000 watts (10 times for 10 uS)
Environmental
- Operating temperature range -40 to 75°C (cold startup @ -40)
- 24V model: Derate 1W per 2°C over 60°C
- Storage temperature range -40 to 85°C
- Humidity (non-condensing) 5 to 95% RH
- Vibration, shock and freefall IEC68-2-6, -27 and -32
- Electrical safety UL508/CSA C22.2/14 (CUL); EN61010-1
- EMC emissions and immunity FCC Part 15 / ICES-003; EN55022/IEC61326-1
- Hazardous locations UL1604/CSA C22.2/213 (CUL), C1, D2; ATEX/Cenelec Zone 2
Mechanical
- DIN-rail or direct to panel mounting
- Packaging material and protection Lexan with IP30 protection
- Dimensions (H x W x D) 4 x 1 x 3.3” (10 x 2.5 x 8.3 cm)
- Weight approximate 0.17 Kg (0.25 lbs)
- MTBF estimated >1,000,000 hours
Specifications are subject to change.
Order Guide
Industrial PoE Injector Order Guide
Part Number | Description |
---|---|
EB-PSE-24V-1A | PoE injector for 1 PoE port (uses unused pairs), 24V input |
EB-PSE-48V-2A | PoE injector for 2 PoE port (uses unused pairs), 48V input |
EB-PSE-24V-1B | uses signal pairs for PoE, ideal for 4 wire cables (special order) |
EB-PSE-48V-2B | uses signal pairs for PoE, ideal for 4 wire cables (special order) |